Personlized Products High Speed Weaving Loom - High speed 150-450cm 1-8 colors mechanical or electric feeder plain crank shedding/cam shedding/dobby shedding/jacquard shedding with single pump or twin pumps high speed water jet loom WT406H at 1000RPM for TPM weaving – WINTOP
Personlized Products High Speed Weaving Loom - High speed 150-450cm 1-8 colors mechanical or electric feeder plain crank shedding/cam shedding/dobby shedding/jacquard shedding with single pump or twin pumps high speed water jet loom WT406H at 1000RPM for TPM weaving – WINTOP Detail:
* Video
* Description
Low Vibration And High Efficiency
WT406H designed for the special fabric weaving like TPM with about 1000RPM,which is optimized the main component and frame structure improving the beating-up, the pentagon roller instead of L type, the ceramic rollers instead,let-off mechanism and take up mechanism,installing assistant device on let-off mechanism,all of this ensure the running stability and reduce vibration and noise,increasing efficiency and enlarging the waving range.
Weft Insertion
New “UH” type nozzle: a new nozzle with improved convergence of jetting water allows filling insertion with a small shedding open and saving water 15% comparing with normal nozzle the pitch between the nozzles is shortened.this decreases the difference between the filling inserting conditions of the two nozzles while filling insertion periods are the same. Consistent filling insertion under high speed operation is attained.
Soft Picking
Soft picking allows stable operation with loom even with less water jetting.the most important is that it will not damage the warp yarn during high speed operation.
Soft Filling Insertion At High Speed
The filling insertion angle is enlarged by improvements in beating curve,filling insertion for thick or twisted yarn is more stabilized. Further more,weaving is greatly improved on easily generates warp looseness during weaving.
New Material Cover
New color cover is used new material,which thickness is 3MM higher than former 851 and 408 model. And it is totally enclosed type.
* Detail
* Specification
| Type | WT406 | WT508 | WT8200 | |
| Reed Space(CM) | 135,150,170,190,210,230,260,280,300,320,340,350,360 | |||
| Useful reed space(CM) | Norminal R/S minus 2cm to 50cm | |||
| Frame | Box frame type Driving section is in oil bath | |||
| Driving | Brake | Direct stop mechanism by an electromagnetic brake | ||
| Controller | Push and touch button(Arrange,stop,forward,brake,reverse) | |||
| Motor | Rush start motor | |||
| Motor power | 1.5kw,1.8kw,2.2kw,2.7kw,3.2kw,3.7kw,4.5kw,5.4kw | |||
| Beating | Crank beating | |||
| Let off | system | Automatic mechanical and continuous let-off;Or electronic let-off,One or vertical two roll | ||
| warp beam | Φ800mm flange，Φ178mm barrel | |||
| Take up | system | Mechanical or electronic continuous take-up | ||
| Pick density | Normal:5-60picks/cm;Special:4-100picks/cm | |||
| Cloth wind-up diameter | Φ420mm,Φ520mm,Φ600mm | |||
| Shedding | Plain shedding | crank shedding(heald frame 2 to 8；1/1 fabric | ||
| Cam shedding | Cam shedding(heald frame 2 to 14);Plain,twill,satin babric | |||
| Dobby shedding | Positive/negative(heald frame 16 max.);Electronic and mechanical reading system;Plain,twill,sation or complex design | |||
| Jaquard | 1408,2688,5120 lifting hooks;electronic jacquard device | |||
| Weft insertion | Measuring and storage | 300#RDP type mechanical measuring turbo blower(single nozzle)Or electronic weft feeder(1-6nozzles) | ||
| Pump | M,L,H type, Single or Double | |||
| Plunger | Ceramic plunger;Φ32/Φ17,Φ32/Φ18,Φ32/Φ20,Φ36/Φ22,Φ36/Φ24,Φ36/Φ26,Φ39/Φ26,Φ39/Φ28,Φ39/Φ30,Φ50/Φ35 | |||
| Nozzle needle | ST20/10;ST30/10;ST45/20,SD75/40 | |||
| Weft filling | 1/2/3/4/6 nozzle | |||
| Filling feeder | Electronic,optical,and self-control | |||
| Selvage/Leno system | Twisting by star,planetary gears | |||
| Electrical part | Madeinchina/import | Main control board,AC contactor,transformer,NC interface,Selvagebrake system,Waste yarn brake system,overheating and overload protection | ||
| Electronic meter | count and display,rotational speed,total yield,team yield,total efficiency,team efficiency,cloth length auto control,stopping analysis and display | |||
| Other devices | take up roller-one;weft density gear-one;Trashcan-one;nozzle needle-one set | |||
* Foundation Layout
Product detail pictures:
Related Product Guide:
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Personlized Products High Speed Weaving Loom - High speed 150-450cm 1-8 colors mechanical or electric feeder plain crank shedding/cam shedding/dobby shedding/jacquard shedding with single pump or twin pumps high speed water jet loom WT406H at 1000RPM for TPM weaving – WINTOP, The product will supply to all over the world, such as: panama, Mongolia, Auckland, We offer OEM services and replacement parts to meet the varying needs of our customers. We offer competitive price for quality products and we will make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.
By Diego from Guyana - 2017.12.02 14:11
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Rita from Ireland - 2017.11.01 17:04
